?
  • 江蘇弘通石化裝備科技有限公司官網歡迎您!

    污水節能處理系統 廢水節能處理系統 污水廢水處理系統
    關鍵詞: 污水節能處理系統     工業廢水處理     節能高鹽廢水處理系統     廢水節能處理系統     廢水污水節能處理     污水廢水節能處理     廢水節能處理     污水處理     污水處理系統     廢水處理     污水廢水節能處理系統     城市污水處理     印染廢水處理    
     
     產品列表
     
     
       
       ZN-C型新型濃縮罐
     

    產品概述/Product overview 
    1、ZN-C型是加長筒體分離段;
    2、為克服濃縮權頂二次蒸汽在末進入冷凝器前被冷疑而返回罐內的缺點。本設備將冷凝器改為斜臥式;
    3、為提高設備的生產能力,本設備將濃縮罐夾套的加熱面積,冷凝、冷卻器的面積均有不同程度加大;
    4、為防止濃縮罐出液管的死角,本產品中采用不銹鋼球形考克;
    5、在濃縮罐下部設置了快開式手孔,以使清理罐內殘液,殘渣;
    6、ZN-C型是將加熱夾套分兩段或三段,當液面低時關必閉上段加熱防止干壁。其底改為錐底便于排盡濃縮液。
    1. ZN-C type is separation section of extended cylinder body
    2. The condenser of this equipment is of inclined type in order to overcome disadvantages of secondary steam (on top part) condensation and flowing back to the concentrator before entering the condenser.
    3. In order to improve production ability, heating area of jacket of the concentrator, area of condenser and cooler has been increased with different degrees.
    4. Stainless steel ball cock is used to prevent dead corner in liquid outlet pipe of the concentrator
    5. Quick-open hand hole is set at lower part of the concentrator to clear residual liquid and slag inside the concentrator.
    6. The ZN-C type divides the heating jacket into two or three sections. When the liquid level is low, the upper section shall be heated to prevent dry wall forming. The bottom part shall be replaced with cone-shaped bottom to make it easier for concentration liquid discharging.

    主要技術參數參考表/Reference table of main technical parameters
     


    江蘇弘通石化裝備科技有限公司擁有好的污水節能處理系統、廢水節能處理系統、污水廢水節能處理系統
    電 話:0510-80751858   傳 真:0510-81010918
    聯系人:熊樹偉    手 機: 13338110818 13506182505
    網 址:www.allneedstravel.com   www.wxhtsh.com
    郵 箱:wxhtsh@wxhtsh.com   13338110818@163.com
    地址:無錫市宜興市周鐵分水鎮新達路80號

     

    女人高潮美女毛片